Save $ 2,10!
10542-5d8a52374fac996d06c5bf7e8dfb8833.jpg
10542-cc8f1ec9db74ff1a963df8559b8e939b.jpg10542-460bbf71e8f94a60f378401998e463dc.jpg10542-4e737a353d253bf51b7846cf0785fa69.jpg10542-3ed71f4142cc80869437e84229ad6c1b.jpg10542-91586cc48d694fec637ccb5f88f21640.jpg

433Mhz Universal Wireless Remote Control Switch DC 12V 10A 1CH relay Receiver Module and RF Transmitter 433 Mhz Remote Controls

$ 15,99 $ 13,99

In stock

Description

433Mhz Universal Wireless Remote Control Switch DC12V 10A 1CH relay Receiver Module with RF Remote 433 Mhz Transmitter with 4-button Intelligent Learning code

Application areas:

Remote control garage door Remote control house door Remote control Lamp Remote control curtains Remote control Fun and other remote control device.

Order Package Include:(1 order model can be chosen)

Order Model 1:

1Piece C-81201D and 1 Remote Controls

Details:

Receiver Switch Module (C-81201D): 1 Piece with Plastic Shell

Remote Control: 1 Pieces with Battery

The way of Circuit Connection:

Please Note:

the Receiver Switch Module part number C-81201D have 3 ways of working mode.The OUTPUT signal have 2 Voltage Level. It decided by the INPUT of the COM pin.

OUTPUT mode 1:

Connect the COM to the Power Supply by DC12V, the Output pin will create DC12V Signal. Please check below diagram for better understanding.

OUTPUT mode 2:

Connect the COM pin with any other Additional Power Supply,the output will create the same Voltage signal as the Additional Power Supply. it can be Direct Current or Alternating Current. Decided by the Additional Power Supply.

BUT, Please note: the additional Power Supply should be in the range of the Receiver Switch Module-(DC5-12V, AC 85-240V).

Please check below diagram for better understanding.

OUTPUT mode 3:

Connect the COM pin with any other device, the it can be used as switches to oper door, control motor or control fun ect..

IMPORTANT INFORMATIONS:

You can match the Remote Control with the Receiver SwitchModule (C-81201D) in 4 mode:

Remote mode 1:
Momentary/Jog

Press and hold one key->ON; Release the key->OFF

Details:

Hold one key , the corresponding channel is working /ON;Then Release your finger the channel turns to stop/OFF .

Remote Mode 2: Toggle/Self-Lock

Press one Key->ON; Press the same key again->OFF

Details:

Press one key once , the corresponding channel turn working/ON;

Press the same key once again the same channel turn to stop/OFF .

Remote Mode 3: Latched/Inter-Lock

Press one Key once->ON; Press another key once->OFF

Details:

Press one key once( take A key for example), the corresponding channel (like channel 1) turn to working/ON;

Press another key once(take B key for example), the same channel turn to stop/OFF. At the same time, another corresponding channel(like channel 2) turn to working / ON .

Remote Mode 4: Time delay mode

Press and hold one key->ON; Release the key->OFF(after 5 seconds,or 10 seconds,or 15 seconds, 3 ways of the time delay can be chosen)

Details:

Hold one key , the corresponding channel is working /ON;Then Release your finger the channel turns to stop/OFF .after 5 seconds,or 10 seconds,or 15 seconds.3 ways of the time delay can be chosen!

Note: When you receive the product, it maybe set in one remote mode randomly, that because each product got test when it can be arranged to shipment.So, if you want to select the remote mode you like, please Delete the existing data for the first step:

How to
Delete the existing remote controls data?

Press the learning key on the Receiver Switch Module board 8 times, then wait for the LED indicator on the board flash for 7 times, the existing data are deleted successfully. ( if the LED indicator on the board doesn’t Flash, Please check the Power Supply status, make it right, and try more times)

Please find the Learning Key of the Receiver Switch Module by checking below photo:

How to Set the Remote Mode:

 

1-Momentary/Jog Mode:

Press the learning key on the Receiver Switch Module board once , The ON-board Led indicator will Flash simultaneously .

Then press any of the remote key (Or which one your want to use) , the on-board LED indicator will flash 5 times to inform that the setting of momentary mode is successful .

2-Toggle/Self-Lock:

Press the learning key on the Receiver Switch Module board 2 times.The ON-board Led indicator will Flash simultaneously .Then press any of the remote key (Or which one your want to use) , the on-board LED indicator will flash 5 times to inform that the setting of toggle mode is successful .

3-Latched/Inter-Lock:

Press the learning key on the Receiver Switch Module board 3 times.The ON-board Led indicator will Flash simultaneously .

Then press first remote key (Like Key A), then press the a second Key (Like Key B), the on-board LED indicator will flash 5 times to inform that the setting of latched mode successful . The first pressed key stands for on(Like Key A ), and the second pressed Key stands for off (Like Key B).

4-Time Delay

Press the learning key on the Receiver Switch Module board forth times, the time delay for 5 seconds .

Press the learning key on the Receiver Switch Module board fifth times, the time delay for 10 seconds .

Press the learning key on the Receiver Switch Module board sixth times, the time delay for 15 seconds .

The LED indicator will be off after the learning key operations.

Then Press one of the remote keys, LED flashes and turn off .

After 3 seconds, the LED indicator will be on again, delay mode set successfully .

Product SPECIFICATION:

Electronics Character:

Input Power: DC10V-14V

Standby Current: <5MA

RF Frequency: 315M or 433M

RF working mode: superheterodyne

Receive sensitivity: >97dbm

Transmitting distance: 20 meters above

Decoding mode: MCU software decoding

Remote storage: 25 pcs

Support remote type: Learning code, Fixed code(Rolling code can be design)

Working mode: Momentary, Toggle, Latching Time delay (5s ,10s ,15s )

Wiring type: fixed terminal

Output Terminal: NO , NC , COM

Dimension of PCB: 35*30*18mm (L,W,H)

Pin functions:

Wiring diagram 1:

+V: 12V + input ;

– V: 12V – input ;

NO: Output , normal open;

COM:Output , common ;

NC: Output , normal close;

Product Photos:

NOTE:

The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost or not working.

 

Additional information

Weight0.06 kg
Dimensions10 x 10 x 10 cm
Brand Name

angry monkey

Frequency

433 MHz

Channel

1

Model Number

C-81201D Kit

Package

No

Use

Universal

Wireless Communication

RF

Working Voltage

12 V

Quiescent Current

5mA

Receiving Sensitivity

>97dbm

Modulation Mode

ASK

Matching Mode

Intelligent Learning code

Reviews

There are no reviews yet.

Be the first to review “433Mhz Universal Wireless Remote Control Switch DC 12V 10A 1CH relay Receiver Module and RF Transmitter 433 Mhz Remote Controls”

Your email address will not be published. Required fields are marked *